Foils

The high-aspect gliders are designed for downwind foiling. Their outline and foil profiles combine hydrodynamic efficiency, deliver higher speeds and excellent pump characteristics in downwind conditions. These foils are based on high-performance windsurf / kite designs and have been adapted for the slower speeds of downwind SUP. Pair any size with the RW 245 rear wing for maximum efficiency and minimal drag: Name Weight Width (cm) Width (in) FW 1250 1.00kg 92 36.2 FW 1450 1.08kg 100 39.3 FW 1650 1.69kg 110 43.3 The advantage of a high-aspect wing like this is its efficiency. A flat shape translates to directional stability and a more effective surface in pumping motion, as more surface is equally leveraged. Learn More

The design brief was clear “must be hydro-dynamically efficient, has to be strong, stiff, cannot bend, with solid mast and wing connections and it must hold up to wipe-outs in the shore break”. Each precision fuselage is individually CNC-cut from aircraft grade 6061-T6 aluminium and is anodized for protection and a great look. The regressed mounting point for the mast creates additional rigidity, strength and durability. • Fuselage 70cm Standard in all Airwave sets (1kg) Learn More

The mast of choice for experienced kite, tow-in-surfers and riders wanting to charge big. Weighs Advanced riders will appreciate the benefits of the additional height while less talented foilers realize quickly that higher your are, the deeper you will fall. Weighs 2.3kg and is suitable for advanced surfers, SUP, winging, wake, pumping, downwinders, kiteboarding and windsurfing. 60cm = More advanced surfers. Will windsurf too (1.9kg) Learn More

We know advanced riders like to mix and match their setup. Bypass the 1325 or 1700 Airwave sets and opt for a specific front wing in combination with the rear wing of your choice. By choosing a perfect setup for your type of foiling and local conditions, you don’t end up with parts that you wouldn’t normally put to good use. NSP Hydrofoil Airwave Mast 80 in bag NSP Hydrofoil Airwave BW Screw Kit M6 x 18 - 2 pcs NSP Hydrofoil Airwave Fuselage 70 cm NSP Hydrofoil Torx Allen Key T30/T40 Kit - 2 pcs NSP Hydrofoil Airwave Mounting Plate NSP Hydrofoil Airwave Mast Screw Kit M6 x 35 - 6 pcs NSP Hydrofoil Airwave Mounting Hardware Kit M8 x 30 - 4 pcs NSP Hydrofoil Airwave FW Screw Kit M8 x 30 - 3 pcs NSP Hydrofoil Airwave Rear Wing Trim Shim Kit - 3 pcs ***Wings and Boards not included Learn More

Designed to spread the load, the anodized aluminum base features screw slots instead of holes, allowing for additional fine tuning. Learn More

Replacement Pump Adapter for NSP Airwing pumps. Learn More

The high-aspect stabilizer for efficiency sustained flight and downwind high-performance. Less drag, less pumping, and a longer ride. Freeride windsurf foilers should use this wing in combination with the 85 Fuselage and its standard-issue two-degree shim. When bought as an after-market wing, the RW 245 rear wing comes with a premium 600-D nylon sleeve with an anti-corrosive zipper to protect your equipment. Learn More

Most hydrofoils in the market are set to a single AOA (angle of attack) at the back wing, usually varying between one- and three degrees. The Airwave is different, as it comes with three precision tuning shims, allowing the rider to adjust the AOA of the back wing to customize the balance between lift, speed, stability and turning. Learn More